Neofactory Low-Tunnel Sportster-Style Tank - 2.4 gal / Raw Steel / Cap Style

Low-tunnel Sportster-style tank for custom fabrication. Supplied as an unfinished tank body; every installation requires modification.

Specifications

• Brand: Neofactory
• Manufacturer part number: 000213
• Manufacturer part number: 001741
• Steel, supplied unfinished and unpainted.
• Nominal capacity: approximately 2.4 gal; usable capacity may be lower after installation.
• Length approximately 385 mm excluding brackets, or 455 mm including brackets; width approximately 230 mm; height approximately 180 mm.
• Tunnel approximately 60 mm wide and 35 mm deep.
• Fuel-tap connection sizes: 1/4 NPT × 2 or 3/8 NPT × 1.

Fitment and installation

• Every vehicle requires modification. Check frame clearance, tunnel dimensions and mounting points before ordering; no direct-fit model or year is specified.
• 000213: compatible with Cam-type gas caps only. Confirm the matching cap, fuel tap and plug bolts for the installation.
• 001741: compatible with right-side screw-type gas caps only. Some model-year caps may fit tightly; insert the cap level. Confirm the matching cap before installation.

Package contents

• One tank body only. Gas cap, fuel tap and plug bolts are not included.

Supply and delivery

• Overseas warehouse. Estimated delivery: 7–10 business days.

Installation notes

• Raw steel may show rust. The tank is supplied without paint or internal coating.
• Before painting, leak-test the tank, remove internal rust and apply an internal tank coating.
• Test-fit before painting and complete the necessary fabrication and mounting work.
• The tank has three fuel outlets. Seal the two unused outlets with compatible plug bolts.
• Have a motorcycle workshop carry out the installation and pre-use checks in accordance with Neofactory's universal gas-tank handling instructions.
• 001741: the underside brass overflow tube may be bent; its opening is normally closed and the overflow function is unused. If an overflow function is required, the tube must be repaired and its opening machined appropriately.