Kraus Motor Open Road Raptor Kit - 2014–2023 Road Glide

For 2014–2023 Road Glide. Includes Adjustable ISO bar and Workman Kickback risers. Handlebar rise is 5.5 inches; selected base heights are 10.5, 12.5 or 14.5 inches. Fitment for 2024 Road Glide Limited requires manufacturer confirmation before ordering. Includes a Raptor plate; nacelle modification is required. The Raptor configuration adds approximately 2 inches to the selected base height.

Specifications

• Brand: Kraus Motor
• Manufacturer part number: KT-ST-RG-230-N-B
• Manufacturer part number: KT-ST-RG-232-N-B
• Manufacturer part number: KT-ST-RG-234-N-B
• KT-ST-RG-230-N-B: Black Anodized / 10.5" / No
• KT-ST-RG-232-N-B: Black Anodized / 12.5" / No
• KT-ST-RG-234-N-B: Black Anodized / 14.5" / No

Supply and delivery

• Overseas warehouse. Estimated delivery: 7–10 business days.

Installation notes

• The Open Road configuration supplies solid riser bushings. Workman’s six 5/16-18 clamp screws use 10 ft-lb and two 1/2-13 mounting bolts 55 ft-lb, with recommended blue threadlocker. Follow the ISO bar guide for adjustable joints and verify brake/clutch/wiring slack. ISO bars require 1-1/8-inch riser clamps and matching pre 2024/ 2024-up bar ends. Inspect O-rings/grommets, route wires before tightening and align the clocking passage without pinching. Apply 8/14 ft-lb only at the respective illustrated joints, not uniformly. Black hardware is separate. Have a qualified technician follow the matching vehicle and kit manuals, test slowly and recheck. Improper installation can cause severe injury or death.
• Manufacturer installation guide: https://krausmotorco.com/content/pdfs/Raptor_Plate_Nacelle_Gauge_Panel_Mod_Template.pdf
• Manufacturer installation guide: https://krausmotorco.com/content/pdfs/ST-PB-02.pdf
• Manufacturer installation guide: https://krausmotorco.com/content/pdfs/Kraus%20ISO%20Bar%20Instructions.pdf
• Manufacturer installation guide: https://krausmotorco.com/content/pdfs/kraus-workman-riser-install.pdf